Safety Recall
#14V745000 In cooler temperatures, the improperly set hydraulic pressure transducer may result in inadvertent boom movement, increasing the risk of injury to the occupant or those nearby.
Technical Summary Altec Industries Inc. (Altec) is recalling certain model year 1999-2014 aerial devices models A65, A70, A75, A72-, A/77-T, A82-T, A72-TE88, and A77-TE93 manufactured January 1, 1999, to July 15, 2014. The affected aerial devices may have an improperly set hydraulic pressure transducer which relieves excessive backpressure in the hydraulic tank circuit.
Safety Recall
#15V101000 If the module overheats, there is an increased risk of a fire.
Technical Summary Altec Industries Inc. (Altec) is recalling certain model year 2012-2014 Digger Derrick and Aerial Device vehicles manufactured October 1, 2012, to June 30, 2014, and mounted on Freightliner chassis. In the event of a short circuit condition, the 30 amp breaker to the trailer relay module may react too slowly to prevent the module from overheating.
Safety Recall
#15V150000 Unintended boom movement of the aerial device increases the operator's risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain model year 2014 Aerial Devices manufactured April 1, 2014, to July 18, 2014, and equipped with certain SUN Hydraulics Corporation counterbalance valves. In the affected vehicles, the counterbalance valve may crack, allowing hydraulic fluid to leak, and possibly result in boom movement.
Safety Recall
#15V096000 If the cylinder lug castings crack, they may fail, resulting in unintended movement of the boom, increasing the risk of personal injury or death to the aerial device user or those nearby.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain model year 2011-2014 Aerial Devices, models L36A, LRV, and LR7, manufactured June 1, 2011, to September 30, 2014, and built with Texas Hydraulics upper boom drive cylinders. In the affected aerial devices, the cylinder base end lug casting may develop cracks.
Safety Recall
#15V473000 If the aerial device is operated while the outrigger is not properly deployed it can cause instability of the boom, increasing the risk of person injury or death.
Technical Summary Altec Industries Inc. (Altec) is recalling certain model year 2006-2015 Aerial Devices manufactured from June 1, 2006, through April 1, 2015. The affected aerial devices outrigger interlock control system may not detect proper deployment of the outriggers, allowing for instability of the boom.
Safety Recall
#16V710000 The improperly sized opening may allow the exposed metal tip of the boom to contact an electrically energized conductor, such as an overhead wire, increasing the risk of a injury to the boom operator.
Technical Summary Altec Industries Inc (Altec) is recalling certain model year 2014-2015 A65, A70, A75, A72-T, A77-T, and A82-T aerial devices manufactured April 15, 2014, to October 15, 2015. The affected aerial devices have a fiberglass cover over the boom tip that may have an improperly sized opening.
Safety Recall
#17V560000 The jib mast may bend and fail, increasing the risk of injury to those nearby.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2011-2017 Altec LS63 Aerial Devices. The jib mast on these vehicles may bend under load.
Safety Recall
#18V552000 If the platform moves unexpectedly, it can increase the risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2008-2018 Aerial Devices equipped with aluminum work platforms. The platform mounting holes may fail, causing the platform to move unexpectedly.
Safety Recall
#18V348000 An overloaded receiver tube could detach, increasing the risk of a crash.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2012-2018 Altec LS63 and LS87 aerial devices equipped with a pintle hook mounted into the Class 3 receiver tube. This towing combination was shipped without a placard that provides the maximum allowable towing limit, possibly resulting in the receiver tube being overloaded.
Safety Recall
#18V110000 Failure of the platform leveling yoke can cause the occupant of the platform to fall out, increasing their risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 1997-2017 LRV, and LR7 Aerial devices. The platform leveling yoke may fail, possibly causing an occupant to fall from the platform.
Safety Recall
#19V483000 Loss of service brake pressure can increase the risk of a crash.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2003-2019 Altec TA45, TA50, TA55, TA60, L37, L39, LRV, LR7, A-T40C, T40P and AP45 vehicles equipped with air-cushioned pintle hitch and/or accessory air components. The accessories utilizing chassis air supply may be missing pressure protection valves. The accessory lines may not prevent service brake line pressure loss due to failure or leakage in the accessory air system. Additionally, the air cushioned pintle hook may have been connected to the incorrect air lines. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems.
Safety Recall
#19V602000 If the recovery winch attempts to lift more than it is rated for, it can increase the risk of an injury or death.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2012-2019 Altec AM60E, AA55E, AH75/85/100, AH125, and AH150 Aerial Devices. The recovery winch valve may allow the winch to lift more than it is rated for.
Safety Recall
#20V301000 If the tow hitch is overloaded, the hitch may fail, increasing the risk of a crash.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2014-2020 Aerial Devices and body only units equipped with Class 3 towing hitches. The tow hitch may have incorrect load rating markings, and may have been damaged by unintentional overloading.
Safety Recall
#21V736000 A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2011-2016 AT200A aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Safety Recall
#21V409000 Unintended movement of the lower and upper booms increases the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Safety Recall
#21V884000 A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2012-2016 AT200A aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Safety Recall
#24V015000 A short circuit increases the risk of a fire.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuit.
Safety Recall
#25V250000 A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2014-2016 AT200A aerial devices. Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to break.
Safety Recall
#25V562000 A cable step that fails during use increases the risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.