Safety Recall
#17V560000 The jib mast may bend and fail, increasing the risk of injury to those nearby.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2011-2017 Altec LS63 Aerial Devices. The jib mast on these vehicles may bend under load.
Safety Recall
#18V693000 The incorrectly installed protective hose sock can cause the potential for electrical continuity through the lower boom, increasing the risk of an electrical shock.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017 Altec AT37, AT41 and AT48 aerial devices. The hydraulic line protective hose sock may have been incorrectly installed through the insulating section of the lower boom.
Safety Recall
#18V706000 If the step separates from the platform, it can increase the risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, L42A and AT37-G TDA58 aerial devices and DB37, DL/DMB D2/3/4B, and DMB digger derricks, equipped with fiberglass platforms. The step on the outside of the fiberglass platform can break off during normal use.
Safety Recall
#18V435000 If enough of the fasteners fail, the pedestal and turntable may separate from the vehicle, increasing the risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017 Altec AT40M/S, TA41-48M/S, and L42A aerial devices. The high strength pedestal and turntable fasteners may experience corrosion cracking, causing them to fail.
Safety Recall
#18V434000 An electrical short can increase the risk of a fire.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2016-2017 Altec Aerial Devices and Service Body vehicles, built on Ram 5500 Diesel chassis. The positive stud on the lead acid battery disconnect bracket may contact the hood and cause an electrical short.
Safety Recall
#18V552000 If the platform moves unexpectedly, it can increase the risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2008-2018 Aerial Devices equipped with aluminum work platforms. The platform mounting holes may fail, causing the platform to move unexpectedly.
Safety Recall
#18V728000 If the converter fails, it can increase the risk of a fire.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2015-2017 Altec TA45M and AM50/55 aerial devices equipped with 500W DC-DC converters. Due to voltage and current spikes, the converter can fail and cause a fire.
Safety Recall
#18V792000 Damaged wiring can increase the risk of a fire.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017-2018 AT37-G, AT40, AT37, AT41, AT48 and L37M Aerial Devices. The under-hood wiring on these vehicles may be damaged by sharp edges within the engine bay area.
Safety Recall
#18V847000 A pedestal that is not secure can increase the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2017 Altec AT37, AT41 and AT48 aerial devices. Some of the fasteners that secure the pedestal to the chassis may be missing or may be loose which can cause a loss of stability or separation of the pedestal.
Safety Recall
#18V873000 If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Technical Summary Altec Industries, Inc is recalling certain 2017-2018 Digger Derrick, Aerial Devices, and Service Body vehicles, equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such these vehicles fail to comply to with the requirements of Federal Motor Vehicle Safety Standard FMVSS 108, "Lamps, Reflective Devices, and Associated Equipment.
Safety Recall
#18V345000 If the travel height is higher than what is indicated on the decal, the vehicle may unexpectedly strike an overhead obstruction, increasing the risk of a crash.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017 Altec TA48S aerial devices. The travel height of these vehicles may be greater than the indicated height on the decal that is located on the chassis dashboard.
Safety Recall
#18V348000 An overloaded receiver tube could detach, increasing the risk of a crash.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2012-2018 Altec LS63 and LS87 aerial devices equipped with a pintle hook mounted into the Class 3 receiver tube. This towing combination was shipped without a placard that provides the maximum allowable towing limit, possibly resulting in the receiver tube being overloaded.
Safety Recall
#18V035000 An electrical short can increase the risk of a fire.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017 AT Aerial Devices mounted on Ford F-550 chassis. A circuit breaker located under the hood may contact the hood, potentially resulting in an electrical short.
Safety Recall
#18V110000 Failure of the platform leveling yoke can cause the occupant of the platform to fall out, increasing their risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 1997-2017 LRV, and LR7 Aerial devices. The platform leveling yoke may fail, possibly causing an occupant to fall from the platform.
Safety Recall
#18V379000 If the grounding system fails, the user has an increased risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2016-2017 Altec Aerial Devices and Digger Derrick vehicles. The high voltage grounding system may be equipped with improperly sized cable connection receptacles causing the high voltage grounding system to fail.
Safety Recall
#18V553000 An electrical short can increase the risk of a fire.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LS63 Aerial Devices. The fuse for the battery was not installed to the guidelines. The incorrectly placed fuse may increase the risk for an electrical short.
Safety Recall
#19V303000 If multiple fasteners fail, the pedestal and turntable may separate, increasing the risk of death or injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, TA50, TA55, TA60, and TA45M-T50 Aerial Devices. The fasteners that are used to secure the turntable to the pedestal may fail.
Safety Recall
#19V409000 An unstable aerial device may suddenly collapse, increasing the risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2016-2019 LR7 Series Aerial Devices. The aerial device can be operated without the rear outriggers being deployed, which may cause the unit to be unstable.
Safety Recall
#19V455000 If the pedestal separates from the turntable, it can increase the risk of injury or death.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017-2018 LR7, TA50/55/60 and L42/45 Aerial Devices. Multiple fasteners used to secure the rotation bearing may break, possibly resulting in the pedestal separating from the turntable.
Safety Recall
#19V483000 Loss of service brake pressure can increase the risk of a crash.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2003-2019 Altec TA45, TA50, TA55, TA60, L37, L39, LRV, LR7, A-T40C, T40P and AP45 vehicles equipped with air-cushioned pintle hitch and/or accessory air components. The accessories utilizing chassis air supply may be missing pressure protection valves. The accessory lines may not prevent service brake line pressure loss due to failure or leakage in the accessory air system. Additionally, the air cushioned pintle hook may have been connected to the incorrect air lines. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems.
Safety Recall
#19V573000 An unstable aerial device can increase the risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2017-2019 LS60 Aerial Devices. The aerial devices may not meet all aerial level ground and slope stability requirements, allowing the units to become unstable and possibly overturn.
Safety Recall
#19V602000 If the recovery winch attempts to lift more than it is rated for, it can increase the risk of an injury or death.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2012-2019 Altec AM60E, AA55E, AH75/85/100, AH125, and AH150 Aerial Devices. The recovery winch valve may allow the winch to lift more than it is rated for.
Safety Recall
#20V401000 Oil absorbed by the exhaust heat shield thermal blanket has an increased risk of a fire from being exposed to hot engine components.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2017-2020 AT200A, AT235, AT37-G, AT40-G, AT41/48M Aerial Devices mounted on a Ford F-350, F-450 or F-550 chassis equipped with a gas engine and Chelsea 249 Power Take-Off (PTO). The PTO may leak oil onto the exhaust heat shield thermal blanket.
Safety Recall
#20V301000 If the tow hitch is overloaded, the hitch may fail, increasing the risk of a crash.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2014-2020 Aerial Devices and body only units equipped with Class 3 towing hitches. The tow hitch may have incorrect load rating markings, and may have been damaged by unintentional overloading.
Safety Recall
#20V502000 The change in boom speed can result in unintended positioning of the boom, increasing the risk of injury.
Technical Summary Altec Industries Inc. is recalling certain 2015-2018 LR7, ALB, AC18, AC23, and AC38 vehicles built on an International N9/N10 chassis. During an HC Desorb cycle, the vehicle's idle will rapidly rise causing an increase in pump flow. The increased pump flow can result in the moving speed of the boom changing.
Safety Recall
#21V998000 The operator could overextend the boom while using the material handling jib, causing the aerial device to tip over and increasing the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2017-2021 AN67-E100, AA67-E100, AN67, AA67, and AN55-E88 aerial devices. The hydraulic plumbing to the lift cylinders of the lower and upper booms could be connected incorrectly, allowing the boom to overextend.
Safety Recall
#21V409000 Unintended movement of the lower and upper booms increases the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Safety Recall
#21V239000 Cracked rotation bearing fasteners may break, causing separation of the pedestal and turntable, increasing the risk of death and/or injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2017-2018 AT37/41/48M, AT41P, AT48S, L37M, L42A, and TA40 aerial device vehicles. The rotation bearing fasteners may experience stress corrosion cracking.
Safety Recall
#21V722000 Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2016-2021 LS87 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Safety Recall
#21V012000 The operator may not have access to the rated capacity information while they are operating the equipment in combined use, increasing the risk of an injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2016-2020 DH-B Series, DH-E Series, and D3000-E digger derricks set up for combined use and equipped with radio remote upper controls. These units only have the derrick use capacity chart and do not have the combined use capacity chart.
Safety Recall
#22V146000 Elevated levels of carbon monoxide gas may not be detected, increasing the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2017-2021 SK185-MP, and SKC landscaping spray vans. The vehicles are not equipped with carbon monoxide detectors.
Safety Recall
#22V147000 Unsecured fuel lines may become damaged and leak fuel, increasing the risk of a fire.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2016-2021 AT and TA aerial devices. The chassis fuel line clamps may not have been secured properly after they were removed to install an aftermarket accessory.
Safety Recall
#22V613000 A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2015-2022 DT65 and DT85 Aerial Devices. The weld between the base boom and the auger stow bracket could crack.
Safety Recall
#22V058000 Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2017-2021 LS60 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Safety Recall
#22V577000 A blown fuse can cause an engine stall, increasing the risk of a crash.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2017-2021 Altec AT200A, AT235, AT235P, AT237, AT37G, AT40G, AT41M, and CB5-132D-S aerial devices. A wire to the boom stow sensor may be routed over a sharp edge, which can expose the wire to metal and result in a blown ignition circuit fuse.
Safety Recall
#23V216000 A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
Safety Recall
#24V015000 A short circuit increases the risk of a fire.
Technical Summary Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuit.
Safety Recall
#25V562000 A cable step that fails during use increases the risk of injury.
Technical Summary Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.