2014 audi s7

4 Active Recalls Safety Report

Is your insurance coverage up to date?

Recalls can affect vehicle value and safety ratings.

Check Rates →

Safety Recall

#13V450000

A fuel leak, in the presence of an ignition source, may result in a fire.

Technical Summary Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2013-2014 Audi S6 and S7 vehicles equipped with 4.0L engines. Due to manufacturing tolerance issues, a fuel line may leak fuel.

Safety Recall

#18V370000

If the PODS module malfunctions, the front passenger air bag may not deploy properly in the event of a crash, increasing the risk of injury.

Technical Summary Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2018 Audi S6 and S7, 2012-2018 A7 and A6 Sedan, and 2014-2018 RS7 vehicles equipped with basic seats (with or without heating). Stress or wear of the body-sensing mat within the front passenger seat may cause the Passenger Occupant Detection System (PODS) control module to malfunction.

Safety Recall

#18V096000

If the operator were to load the vehicle based on information on the tire information label, they could overload the vehicle, increasing the risk of a crash.

Technical Summary Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2014-2015 Audi S7 and 2016-2018 RS7 vehicles. The tire information label on these vehicles incorrectly lists the combined maximum weight as 1146 lbs/520 kg, when the correct combined maximum weight is actually 992 lbs/450 kg. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims.

Safety Recall

#22V178000

Worn bearings can cause the turbine wheel to contact the turbocharger housing or cause the shaft to break, causing an engine stall and increasing the risk of a crash.

Technical Summary Volkswagen Group of America, Inc. (Audi) is recalling certain 2013-2017 A8, S6 Sedan, S7, S8, and 2014-2017 RS7 vehicles. The turbocharger oil supply strainer can become blocked, causing wear to the bearings due to lack of lubrication.