2013 audi s8

5 Active Recalls Safety Report

Is your insurance coverage up to date?

Recalls can affect vehicle value and safety ratings.

Check Rates →

Safety Recall

#13V448000

Should the sunroof's glass break while the vehicle is in use, the falling glass could injure the driver or passengers. It could also distract the driver, increasing the risk of a crash.

Technical Summary Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2013-2014 Audi A8 and S8 vehicles equipped with a standard sunroof, manufactured March 12, 2013, through July 15, 2013. These vehicles are equipped with a standard sunroof glass panel that may shatter.

Safety Recall

#18V430000

A fuel leak in the presence of an ignition source can increase the risk of a fire.

Technical Summary Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2015 Audi S8 and A8 vehicles. The fuel supply line for the high pressure fuel pump may become porous over time, resulting in a fuel leak.

Safety Recall

#19V057000

Leaking fuel, in the presence of an ignition source, increases the risk of fire.

Technical Summary Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2016 Audi A8 and S8 vehicles. The fuel supply line for the high pressure fuel pump may become porous and leak fuel.

Safety Recall

#20V397000

If the seal contacts hot engine components, there could be an increased risk of a fire.

Technical Summary Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2018 Audi S8 and A8 vehicles. The seal around the engine compartment may come loose and contact hot engine components.

Safety Recall

#22V178000

Worn bearings can cause the turbine wheel to contact the turbocharger housing or cause the shaft to break, causing an engine stall and increasing the risk of a crash.

Technical Summary Volkswagen Group of America, Inc. (Audi) is recalling certain 2013-2017 A8, S6 Sedan, S7, S8, and 2014-2017 RS7 vehicles. The turbocharger oil supply strainer can become blocked, causing wear to the bearings due to lack of lubrication.