2020 braun ambulances express-plus-type-i

4 Active Recalls Safety Report

Is your insurance coverage up to date?

Recalls can affect vehicle value and safety ratings.

Check Rates →

Safety Recall

#20V647000

The vehicle operator may not be able to read the LCD screen or use the buttons or both. If the LCD display appears blank, emergency personnel may not have immediate access to the functions and controls operated by the LCD screen which could delay emergency operations, increasing the risk of injury to a patient or increase the risk of a crash.

Technical Summary Braun Ambulances (Braun) is recalling certain 2019 Chief XL Type I and 2019-2020 Chief XL Type III, 2018-2020 Express Plus Type I and 2019 Express Type III, Liberty Type I, Raider Type I and Super Chief ambulances. The lighting and HVAC display may lock up affecting functions like the back up camera, emergency warning lights, or patient care devices depending on the application.

Safety Recall

#22V370000

Inoperable vehicle lighting can reduce visibility and increase the risk of a crash.

Technical Summary Braun Ambulances is recalling certain 2021 Chief XL Type I, 2020 TLC, and Express Plus ambulances. An additional resistor was incorrectly installed on the printed circuit board, which can disrupt CAN network communication and cause vehicle lighting to fail.

Safety Recall

#23V331000

The loss of rear brake function can increase the risk of a crash.

Technical Summary Braun Ambulances (Braun) is recalling certain 2019-2023 Chief XL Type I, Express Plus Type I, and Liberty Type I ambulances built on Chevrolet medium and heavy-duty chassis. The Liquid Spring suspension systems may come in direct contact with the right rear brake line, causing excessive wear and possibly resulting in the loss of the rear brakes.

Safety Recall

#24V063000

Overloaded electrical circuits can overheat, increasing the risk of fire.

Technical Summary Braun Ambulances (Braun) is recalling certain 2020-2023 Chief XL I, Express Plus I, Chief XL III, Liberty I, Super Chief I, Signature Series III, Signature Series I, and 2020-2024 Express III emergency vehicles equipped with Weldon 8X16 Input-Output nodes. In the event of a short circuit or wiring failure, the firmware in the node may fail to shut off the output pin, resulting in overloaded electrical circuits.