2011 eldorado xhf
3 Active Recalls
Safety Report
Is your insurance coverage up to date?
Recalls can affect vehicle value and safety ratings.
Safety Recall
#11V432000IF THE INLET OR OUTLET SECTIONS DISCONNECT, HOT EXHAUST GASES CAN VENT PRIOR TO EXITING THE TAILPIPE, CREATING THE RISK OF COMBUSTION AND A FIRE. IF BOTH CLAMPS FAIL, THERE IS A RISK IN SOME APPLICATIONS THAT THE DOC/DPF HOUSING MAY DETACH COMPLETELY, CREATING A ROAD HAZARD.
Technical Summary ELDORADO IS RECALLING CERTAIN MODEL YEAR 2011 COMMERCIAL BUSES, MODELS EZ RIDER II MAX, TRANSMARK, XHF, AND AXESS, MANUFACTURED FROM NOVEMBER 1, 2010, THROUGH MARCH 31, 2011, EQUIPPED WITH A CUMMINS ISB, ISL, ISC, OR ISX DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
Safety Recall
#15V316000If engine oil comes into contact with a hot surface, there is an increased risk of a fire.
Technical Summary Eldorado National-California, Inc. (Eldorado) is recalling certain model year 2007-2015 Axess, E-Z Rider II, and XHF vehicles manufactured July 1, 2007, to May 2, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.
Safety Recall
#16V012000If the seatbelt anchorage assembly separates from the J-Bracket, the bus driver may not be properly restrained in the event of a crash increasing their risk of injury.
Technical Summary Eldorado National-California , Inc. (Eldorado) is recalling certain model year 2010-2015 Axess and EZRM, 2011-2015 XHF, and 2014-2016 Arrivo vehicles equipped with certain Recaro Ergo-M Commercial Bus Driver Seats. The affected seats have J-Brackets that may be missing welds which could allow the seat belt anchorage assembly to separate from the J-Bracket.