Safety Recall
#20V550000 Missing or loose bolts on the start stop accumulator endcap could result in a transmission fluid leak and may progress to a loss of transmission function. A transmission fluid leak in the presence of an ignition source may increase the risk of fire.
Technical Summary Ford Motor Company (Ford) is recalling certain 2019-2020 Edge, Transit Connect and Lincoln MKX and 2020 Escape and Lincoln Corsair vehicles. The start/stop accumulator endcap may have missing or loose bolts.
Safety Recall
#20V636000 If the engine overheats, it can result in engine damage and increase the risk of a fire.
Technical Summary Ford Motor Company (Ford) is recalling certain 2019-2020 Transit Connect vehicles equipped with 2.5L engines. The powertrain control module (PCM) software has fail-safe temperature threshold values higher than intended for the engine. This may delay the fail-safe cooling strategy in the event of coolant loss and result in engine overheating.
Safety Recall
#20V791000 Air bag modules missing the first-stage booster propellant will not deploy as intended in a crash, increasing the risk of injury.
Technical Summary Ford Motor Company (Ford) is recalling certain 2020 EcoSport and 2019-2020 Transit Connect vehicles. Depending on the model, either the driver side or passenger side frontal air bag modules are missing the first-stage booster propellant and sleeve. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection.
Safety Recall
#21V376000 A damaged or missing bushing may prevent the vehicle from shifting into the intended gear, causing the vehicle to move in an unexpected direction. Additionally, the vehicle may roll after the driver selects the 'Park' position. Either scenario increases the risk of a crash or injury.
Technical Summary Ford Motor Company (Ford) is recalling certain 2013-2021 Transit Connect vehicles equipped with 2.5L engines. The bushing that attaches the shifter cable to the transmission may degrade or detach.
Safety Recall
#22V413000 A damaged or missing bushing may prevent the vehicle from shifting into the intended gear, and cause the vehicle to move in an unexpected direction. Additionally, the vehicle may roll after the driver selects the 'Park' position. Either scenario increases the risk of a crash or injury.
Technical Summary Ford Motor Company (Ford) is recalling certain 2013-2019 Escape, 2013-2018 C-Max, 2013-2016 Fusion, 2013-2021 Transit Connect, and 2015-2018 Edge vehicles. The bushing that attaches the shifter cable to the transmission may degrade or detach.
Safety Recall
#24V294000 A roof panel that detaches while driving can create a road hazard and increase the risk of a crash.
Technical Summary Ford Motor Company (Ford) is recalling certain 2017-2019 Transit Connect vehicles. An improper bond may exist between the panoramic roof and the vehicle body, which can result in the panel detaching from the vehicle.
Safety Recall
#25V196000 An engine that overheats increases the risk of a fire.
Technical Summary Ford Motor Company (Ford) is recalling certain 2019-2020 Transit Connect vehicles previously repaired incorrectly under recall number 20V-636. The powertrain control module (PCM) software has fail-safe temperature threshold values higher than intended for the engine. This may delay engine cooling and result in engine overheating.
Safety Recall
#25V442000 A rearview camera that displays a blank image can reduce the driver's view behind the vehicle. A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver. Both of these situations can increase the risk of a crash.
Technical Summary Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A software error may cause the rearview camera to display a blank image, or the image may remain on the display after the backing event has ended.