Safety Recall
#21V094000 If the sensor cables are installed incorrectly, the anti-lock brake system may malfunction, increasing the risk of a crash.
Technical Summary Great Dane Trailers (Great Dane) is recalling certain 2021-2022 Champion and 2022 Everest trailers equipped with the WABCO 2S/2M iABS (Anti-Lock Brake) system. The iABS sensor cables may be plugged into the wrong ports on the electronic control unit (ECU).
Safety Recall
#21V841000 Pressure loss in the iABS unit can cause a loss of brake function, increasing the risk of a crash.
Technical Summary Great Dane Trailers (Great Dane) is recalling certain 2020-2022 Everest, Champion, and Freedom trailers. The screws that secure the bracket cover and end cover of the iABS unit may have been improperly tightened, which can allow the screws to loosen and back out, resulting in a loss of pressure in the unit.
Safety Recall
#21V943000 Hub bearing failure could cause the wheel hub assembly to detach, causing a loss of stability and control, creating a road hazard, and increasing the risk of a crash.
Technical Summary Great Dane Trailers (Great Dane) is recalling certain 2022 Champion dry van and Everest refrigerated trailers. The wheel hubs may have an insufficient amount of lubrication, which could cause the hub bearings to fail.
Safety Recall
#21V383000 Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
Technical Summary Great Dane Trailers (Great Dane) is recalling certain 2022 Champion trailers equipped with air disc brakes. The brake caliper mounting bolts may be insufficiently tightened, allowing the bolts to loosen.
Safety Recall
#22V159000 Loose or missing bolts can cause the suspension to shift rearward, resulting in a loss of vehicle control. In addition, bolts that fall off can become a road hazard. Both of these scenarios can increase the risk of a crash.
Technical Summary Great Dane Trailers (Great Dane) is recalling certain 2022 Champion Dry Van and Everest Refrigerated trailers. The suspension radius rod mounting bolts were not properly tightened, which could allow the bolts to come loose and fall out.