2009 hino nv8j

4 Active Recalls Safety Report

Is your insurance coverage up to date?

Recalls can affect vehicle value and safety ratings.

Check Rates →

Safety Recall

#10V157000

IF THE BOLTS WERE TO LOOSEN IT COULD CAUSE A VIBRATION IN THE DRIVELINE. IF THIS VIBRATION WERE IGNORED, THE U-JOINT ATTACHMENT BOLTS COULD SHEAR AND A PORTION OF THE PROPELLER SHAFT COULD SEPARATE FROM THE VEHICLE, THUS FALLING ONTO THE SURFACE OF THE ROADWAY AND BE STRUCK BY A VEHICLE RESULTING IN A CRASH.

Technical Summary HINO IS RECALLING CERTAIN MODEL YEAR 2009-2010 NV8J TRUCKS. THE U-JOINT ATTACHMENT BOLTS MAY NOT HAVE BEEN PROPERLY TIGHTENED DURING THE MANUFACTURING PROCESS.

Safety Recall

#10V154000

IF THE DRIVE COUPLER BOLTS WERE TO LOOSEN IT COULD CAUSE A VIBRATION IN THE DRIVELINE. IF THIS VIBRATION WERE IGNORED, THE DRIVE COUPLER BOLTS COULD SHEAR AND THE COUPLING BETWEEN THE ENGINE AND TORQUE CONVERTER WOULD NOT TRANSMIT POWER. THIS ULTIMATELY COULD RESULT IN A CRASH.

Technical Summary HINO IS RECALLING CERTAIN MODEL YEAR 2008-2010 NV8J TRUCKS EQUIPPED WITH ALLISON 3000 RDS AUTOMATIC TRANSMISSION. THE DRIVE COUPLER BOLTS MAY NOT HAVE BEEN PROPERLY TIGHTENED AT THE FACTORY DUE TO THE INCORRECT TOOL POSSIBLY BEING USED DURING THE MANUFACTURING PROCESS.

Safety Recall

#10V156000

THE EXHAUST SYSTEM COULD FALL ONTO THE ROADWAY AND BE STRUCK BY A FOLLOWING VEHICLE RESULTING IN A CRASH.

Technical Summary HINO IS RECALLING CERTAIN TRUCKS WITH VERTICAL EXHAUST PIPES. CERTAIN BOLTS ATTACHING THE EXHAUST SYSTEM TO THE TRUCK MAY NOT HAVE BEEN PROPERLY TIGHTENED DURING THE MANUFACTURING PROCESS. THE BOLTS COULD FAIL ALLOWING THE EXHAUST SYSTEM TO SEPARATE FROM THE TRUCK.

Safety Recall

#12V555000

If the B+ circuit shorts to ground, it may lead to a fire.

Technical Summary Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing sheath.