2009 international lonestar

3 Active Recalls Safety Report

Is your insurance coverage up to date?

Recalls can affect vehicle value and safety ratings.

Check Rates →

Safety Recall

#10V383000

WHEN THE LINKAGE SEPARATES, THE PASSENGER SIDE WIPER ARM WILL NO LONGER OPERATE WHICH COULD LEAD TO REDUCED DRIVER VISIBILITY, INCREASING THE RISK OF A CRASH.

Technical Summary NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 INTERNATIONAL PROSTAR AND LONESTAR HEAVY TRUCKS MANUFACTURED FROM JANUARY 2, 2007 THROUGH JUNE 1, 2010. THE PASSENGER SIDE WINDSHIELD WIPER LINKAGE ROD MAY SEPARATE FROM EITHER THE WIPER DRIVE ARM OR PASSENGER SIDE PIVOT ASSEMBLY.

Safety Recall

#10V037000

LESS THAN OPTIMAL RSC CONTROL OF THE TRAILER BRAKES DURING A ROLL STABILITY EVENT MAY INCREASE THE RISK OF A CRASH WHICH CAN RESULT IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

Technical Summary NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2009-2010 INTERNATIONAL PROSTAR AND LONESTAR TRUCKS EQUIPPED WITH FEATURE CODE 04AZT ROLL STABILITY CONTROL. THE AIR LINE THAT SUPPLIES THE TRACTION SOLENOID VALVE OF THE ROLL STABILITY CONTROL (RSC) SYSTEM MAY HAVE BEEN CONNECTED TO AN INCORRECT PORT ON THE AIR TANK. THIS CONDITION WILL AFFECT AIR MODULATION TO THE TRAILER BRAKES IF RSC IS ACTIVATED DURING A ROLL STABILITY EVENT. THIS CONDITION AT NO TIME AFFECTS THE NORMAL DESIGN FUNCTION OF THE TRACTOR AND TRAILER SERVICE BRAKES WHEN ACTIVATED BY THE DRIVER, OR THE FUNCTION OF THE TRACTOR RSC SYSTEM.

Safety Recall

#13V439000

Because of the improper orientation, in the event of an air leakage at the isolation/vent valve, the 5th wheel jaw may release, unexpectedly releasing the trailer from the tractor, increasing the risk of a vehicle crash.

Technical Summary Navistar, Inc. is recalling certain model year 2008-2013 International LoneStar, ProStar, and TranStar trucks manufactured February 20, 2008, through July 29, 2013 and equipped with an electronic fifth wheel jaw release system (feature code 0595BAW or 0595BAY). Due to an assembly error, the air lines at the isolation/vent valve may not be oriented correctly.