2017 kme predator
4 Active Recalls
Safety Report
Is your insurance coverage up to date?
Recalls can affect vehicle value and safety ratings.
Safety Recall
#18V433000Using the device to lift the rated load may cause the device to deform, increasing the risk of injury.
Technical Summary Kovatch Mobile Equipment Corp. (KME) is recalling certain 2017 KME Predator TDA, 2016-2018 KME Predator SS TDA, and 2018 KME Predator SS Aerial emergency vehicles equipped with an aerial ladder and optional tip mounted lifting device. The lifting devices do not meet the specified load rating or safety factor.
Safety Recall
#20V341000A retarder that separates from the vehicle may increase the risk of a crash.
Technical Summary Kovatch Mobile Equipment Corp. (KME) is recalling certain 2011 and 2013-2020 Predator Severe Service, 2015 Predator Panther, 2011, 2013-2014 and 2017-2018 Predator, and 2014 KME commercial cab/chassis firetrucks equipped with optional Telma induction braking systems. The Telma axial retarder braking mechanism may separate from the vehicle while it is moving.
Safety Recall
#20V192000An electrical short circuit may drain the battery, preventing the emergency vehicle from being able to operate, thereby increasing the risk of injury in the event of an emergency.
Technical Summary Kovatch Mobile Equipment Corp. (KME) is recalling certain 2016-2020 Predator Custom, Predator Panther, Predator Severe Service, and 2016-2019 Commercial Cab/Chassis vehicles. An electrical short circuit can occur due to a build-up of corrosion between the positive battery jumper stud and the retaining ring for the stud.
Safety Recall
#21V097000Broken welds may cause the mounts to separate from the axle, resulting in loss of control of the vehicle, and increasing the risk of a crash.
Technical Summary Kovatch Mobile Equipment Corp. (KME) is recalling certain 2017-2018 Predator SS Rescue, 2017 Predator Emergency Tractor, 2014-2020 Predator Panther Pumper, 2013-2017 Predator Pumper, 2014 Predator Rescue, and 2013-2020 Predator SS Pumper vehicles. The welds that attach the suspension mounts and torque rod mounts to the rear axle may have been insufficiently welded, possibly causing the welds to break.