Safety Recall
#13V195000 A loss of brake function at one wheel will lead to increased stopping distances and pulling to the left or right when braking, which may increase the risk of a crash.
Technical Summary Mack Trucks, Inc. is recalling certain model year 2013-2014 CHU, CXU, GU, MRU, and LEU trucks manufactured July 16, 2012, through march 18, 2013 and equipped with drum brakes. The clevis pin for the brake slack adjuster may be missing a cotter pin. If the cotter pin is not installed, the clevis pin may loosen and fall out causing a loss of brake function on the affected wheel.
Safety Recall
#13V493000 A loose steering shaft would result in a loss of steering control, increasing the risk of a crash.
Technical Summary Mack Trucks is recalling certain model year 2014 CXU and GU model vehicles manufactured May 10, 2013, through June 12, 2013. The upper and lower steering shaft pinch bolts may have not been torqued to specification. This may cause the steering shaft to come loose.
Safety Recall
#13V492000 If the nut comes loose, the hub assembly may separate from the vehicle, increasing the risk of a crash.
Technical Summary Mack Trucks is recalling certain model year 2013-2014 CHU, CXU, GU, LEU, and MRU vehicles manufactured with pro-torque axle spindle nuts from August 28, 2012, through August 16, 2013. The pro-torque nut may not have been installed correctly, which may result in a loosening of the nut.
Safety Recall
#14V078000 Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
Technical Summary Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.
Safety Recall
#14V208000 A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
Technical Summary Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
Safety Recall
#15V804000 If the rear brakes overheat there would be an increased risk of a tire blowout or a wheel-end fire.
Technical Summary Mack Trucks, Inc. (Mack) is recalling certain model year 2010-2016 Granite 4X2 trucks manufactured September 17, 2009, to July 31, 2015. Due to a brake imbalance between the steer and drive axle brakes, the rear brakes may overheat.
Safety Recall
#15V522000 If the electrical cables and air lines were to fall and get tangled in the driveline, it could affect the electrical system and braking system, increasing the risk of a vehicle crash.
Technical Summary Mack Trucks, Inc. (Mack) is recalling certain model year 2013 and 2015 Titan (TD), model year 2014 and 2015 Pinnacle (CHU), and model years 2009-2010, 2012, and 2014-2016 Granite (GU) trucks. The chassis harness and air lines may not be properly clipped to the crossmember, which can allow the cables and air lines to fall and get twisted in the driveline.
Safety Recall
#15V528000 If the air brake system reservoir has as insufficient volume, braking performance may be affected, increasing the risk of a crash.
Technical Summary Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2016 Granite (GU) trucks manufactured September 24, 2011, to July 1, 2015. The affected trucks may be equipped with an air brake system reservoir that does not have a sufficient volume. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems.
Safety Recall
#15V690000 If the hex nuts are not tightened to specification, the driveshaft may disconnect from the drive axle, resulting in a loss of propulsion and increasing the risk of a crash.
Technical Summary Mack Trucks, Inc. (Mack) is recalling certain model year 2014 Granite (GU) trucks manufactured January 1, 2013, to October 16, 2013, and equipped with certain drive axles manufactured by Marmon-Herrington. The affected axles are equipped with hex nuts on the flange yoke that may not have been properly tightened.
Safety Recall
#15V702000 If the turbocharger oil supply line oil leaks in the proximity of the engine exhaust manifold there would be an increased risk of a fire.
Technical Summary Mack Trucks, Inc. (Mack) is recalling certain model year 2010-2016 Granite (GU), LR, and TerraPro (LEU, MRU) trucks manufactured November 17, 2009 to October17, 2015. The affected trucks have engines with a turbocharger oil supply line that may contact or interfere with the turbocharger inlet elbow, clean air intake clamp, or the air fuel control tube, and result in an oil leak.
Safety Recall
#16V099000 If he cap nut loosens and falls off, the yoke can separate from the axle input shaft and allow the drive shaft to disconnect, increasing the risk of a crash.
Technical Summary Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.
Safety Recall
#16V929000 Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.
Technical Summary Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.