2016 mitsubishi outlander-sport

8 Active Recalls Safety Report

Is your insurance coverage up to date?

Recalls can affect vehicle value and safety ratings.

Check Rates →

Safety Recall

#16V867000

If the outer tube corrodes, there may be a rapid loss of the gas used to provide lift assistance, causing the lift gate to fall suddenly, increasing the risk of injury.

Technical Summary Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2011-2012 Outlander Sport vehicles manufactured August 26, 2010, to June 1, 2012, and 2016 Outlander Sport vehicles manufactured January 11, 2016, to July 8, 2016. The lift gate support outer tube on the affected vehicles may have insufficient anti-corrosion treatment that can allow the outer tube to corrode due to salt and water penetration.

Safety Recall

#16V563000

A hesitation during acceleration can increase the risk of a crash.

Technical Summary Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2015-2016 Outlander Sport vehicles and 2016 Outlander and Lancer vehicles. The affected vehicles are equipped with a constant velocity transmission (CVT) that, in certain driving conditions, may cause a delay in the vehicle accelerating.

Safety Recall

#17V233000

If a door opens while the vehicle is being driven, it can increase the risk of injury.

Technical Summary Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2016 Outlander and Outlander Sport vehicles. The inside door latch mechanisms may not latch securely in high temperatures, allowing the doors to open while vehicle is in motion.

Safety Recall

#17V609000

If the engine stalls, there is an increased the risk of a crash.

Technical Summary Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2015-2017 Outlander, 2015-2016 Lancer and Outlander Sport, and 2015 Lancer Evolution vehicles. These vehicles may have defective relays that can result in an engine stall, reduced engine power or the engine overheating.

Safety Recall

#18V103000

Loss of wiper function can reduce visibility and increase the risk of a crash.

Technical Summary Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2011-2016 Outlander Sport vehicles. Water may enter between the hood and windshield and cause the front wiper link ball joint to corrode, possibly resulting in the wiper link separating and the wipers becoming inoperative.

Safety Recall

#18V070000

If the parking brake actuator shaft binds, the parking brake may not engage or disengage fully. If the parking brake does not engage properly, the vehicle may move unexpectedly if it is parked on a slope, increasing the risk of a crash.

Technical Summary Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2014-2016 Outlander and 2013-2016 Outlander Sport vehicles. Water may enter the rear brake calipers causing the parking brake actuator shafts to corrode and possibly bind.

Safety Recall

#20V279000

A detached front control arm can result in a loss of vehicle control, increasing the risk of a crash.

Technical Summary Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2008-2010 Lancer, 2009-2010 Lancer Sportback, 2008-2013 Outlander, and 2011-2016 Outlander Sport vehicles originally sold in, or ever registered in, Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.

Safety Recall

#20V741000

If the parking brake operating shafts bind, the parking brakes may not engage or disengage fully. If the parking brakes do not engage properly, the vehicle could rollaway, increasing the risk of a crash.

Technical Summary Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2016 Outlander and Outlander Sport vehicles. The rust prevention coating on the rear brake operating shafts could have been peeled off during the assembly process. As a result, water entering the rear brake caliper boot may cause the parking brake operating shafts to corrode and possibly bind.