2010 turtle top odyssey-xl

3 Active Recalls Safety Report

Is your insurance coverage up to date?

Recalls can affect vehicle value and safety ratings.

Check Rates →

Safety Recall

#12V044000

IF SUFFICIENT ARCING OCCURS, THE FUSE HOLDER MAY MELT AND POTENTIALLY CAUSE A FIRE.

Technical Summary TURTLE TOP IS RECALLING CERTAIN MODEL 2008 THROUGH 2011 ODYSSEY, ODYSSEY XL, AND ODYSSEY LT VEHICLES MANUFACTURED FROM FEBRUARY 11, 2008, THROUGH OCTOBER 26, 2011, AND BUILT ON FORD, GENERAL MOTORS, AND FREIGHTLINER CHASSIS, EQUIPPED WITH A CARRIER CORPORATION GEN V EM-1 EVAPORATOR. THE EM-1 EVAPORATORS CONTAIN A FUSE HOLDER IN THE MOTOR ASSEMBLY WHICH DUE TO TIME, TEMPERATURE, AND/OR VIBRATION MAY CAUSE THE FUSE TO LOOSEN IN THE FUSE HOLDER, RESULTING IN HIGH RESISTANCE AND ARCING.

Safety Recall

#14V651000

If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.

Technical Summary Turtle Top is recalling certain model year 2006-2014 Odyssey, 2008-2009, 2011 Odyssey LT, and 2007-2008, 2010-2012 Odyssey XL, 2008, 2012 Terra Transport, and 2007-2008, 2013 Van Terra transit buses equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.

Safety Recall

#16V009000

If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.

Technical Summary Turtle Top is recalling certain model year 2006-2014 Odyssey, 2008-2009 and 2011 Odyssey LT, 2007-2008 and 2010-2012 Odyssey XL, 2008 and 2012 Terra Transport and 2007-2008 and 2013 Van Terra vehicles equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.